Siemens 80Lb FI114991 / Mototron DEKA IV High Impedance Injectors

Description

Siemens 80Lb FI114991 / Mototron DEKA IV High Impedance Injectors

• Genuine, reliable Siemens Injectors
• High Impedance
• Low Impedance performance characteristics with High Impedance Compatibility
• Static Flow Rate: 80lb/hr = 875 cc/min
• Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
• Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
• Connector: Bosch EV6 – Adapters
• Series: DEKA 4 ( DEKA IV )
• O-Ring Type: Viton

These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability. Adding to the flexibility of application, these units are high-impedance, making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

This newly released injector from Siemens is based on the same design as the popular FI114961 60 lb/hr DEKA IV ( DEKA 4 ) injector. The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6 / USCAR connector as Part Number MOTR-04560. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!